A 10000 litre water tank for houses, smallholdings and light industrial units — bolted together in the pit with no crane.
Indicative — the quotation confirms the final figure US$3,600 Lead time 15 – 25 days · ex Dezhou, Shandong
SKU LVJ-BDF-10000L
What buyers said once the tank was on site — every review left on our Alibaba store, in their own words.
The 10000 litre BDF tank from LVJIA is a bolted, buried storage tank pressed from bimetallic composite plate at our own plant in Dezhou, Shandong. It is the small end of the range: ten cubic metres, enough for a house, a smallholding or a light industrial unit.
A 10000 litre BDF tank is a sectional tank assembled below ground from 1000 × 1000 mm pressed panels. Each panel is drawn in a single press stroke from a composite plate: a food-grade stainless layer on the face that meets the water, hot-dip galvanised steel behind it to carry the load. The panels bolt together inside the excavation, so no welding happens on site and no welded seam is ever in contact with the stored water. LVJIA builds this tank from 1 to 1,000+ m³, which means the volume follows the pit you have dug rather than a fixed catalogue size.
At this size the tank is typically 5 × 2 × 1 m or 4 × 2.5 × 1 m — a shallow pit, a 2 mm or 3 mm panel and about a day of work to bolt together. Panels arrive flat on a single pallet and are carried by hand, so the only plant needed on site is an excavator for the hole and a concrete slab to sit on. There is no welding, no crane and no curing time, which is what makes a buried tank realistic on a domestic or small commercial site with no heavy equipment.
Three things separate this 10000 litre BDF tank from a coated steel tank. First, there is no coating: the corrosion-resistant surface is the stainless face of the panel itself, so there is nothing to blister, peel or repaint. Second, the panel is drawn rather than fabricated, so the water never touches a heat-affected zone where pitting normally starts. Third, every joint is closed with EPDM strip and stainless fasteners outside the water path, which means a single panel can be replaced years later without cutting the tank open. The module is reinforced on all four corners, and the wall is carried on a 16 mm section rated for a full 4.5 m of head.
| Model number | Buried water tank |
|---|---|
| Capacity | 10 m³ · 10,000 litres |
| Material | New stainless steel composite plate (BDF) |
| Typical footprint | 5000 × 2000 mm at 1 m deep |
| Panel module | 1000 × 1000 mm, pressed and drawn |
| Panel thickness | 2 – 3 mm at this depth |
| Wall thickness | 16 mm |
| Overflow | DN100 to storm drain |
| Plant required | None for assembly |
| Water temperature | 0 – 100 °C |
| Certification | ISO 9001 · CE |
| Origin | Dezhou City, Shandong Province, China |
Ten cubic metres can be laid out as 5 × 2 × 1 m, 4 × 2.5 × 1 m, 5 × 1 × 2 m or 2.5 × 2 × 2 m, so the shape follows the space beside a drive or behind a building. Nothing is downgraded for the small size: the wall, the panel and the joints are identical to the 800 m³ tanks.
| Tank height | Panel thickness | Typical use |
|---|---|---|
| 1.0 – 1.5 m | 2 mm | Shallow buried reserve |
| 2.0 m | 3 mm | Standard buried tank |
| 3.0 m | 4 mm | Deep reserve, high head |
| 4.0 – 4.5 m | 5 mm | Maximum depth, pump station |
Every 10000 litre BDF tank is filled and held at full head for 48 hours before it leaves the factory, and no joint is allowed to weep. The composite plate carries drinking-water contact report SP2630499 from the Dezhou Institute of Product Quality Standards and Metrology, and the plant holds ISO 9001 with CE marking on the product. Copies of the report and the certificate ship with the order, and you can see the full set on our certifications page. The same specification is published on our Made-in-China storefront, where LVJIA is an audited supplier.
Pricing for the 10000 litre BDF tank starts at US$200 per cubic metre, falling to US$180 from 10 m³ and US$150 from 50 m³, FOB Tianjin or Qingdao. The minimum order is one set. Samples ship in 3 to 5 days and batch orders in 15 to 25 days from Dezhou, Shandong, on wooden pallets. The same panel system runs to 800 m³, so a larger tank later uses identical parts. Minimum order is one set and samples ship in 3 to 5 days.
Send the pit dimensions and the volume you need and LVJIA returns an arrangement drawing and a panel schedule before you commit to anything. If you would rather talk it through first, our engineers answer specification questions directly through technical help, and the rest of the range sits on the BDF underground water tank page.
If the material has to change, the stainless steel 316 water tank is the same tank in stainless steel, for sites where chlorides or a hygiene specification rule out coatings, while the welded stainless steel water tank builds it in stainless steel. Elsewhere in the BDF underground range there is the BDF fire water tank for fire reserves and the food grade BDF tank for drinking water.
At a glance
Every tank is built to the pit you have. The module is a 1000 × 1000 mm pressed panel, so capacity steps in whole cubic metres and the arrangement can be long and shallow or short and deep without changing the parts list.
Panel thickness by tank height — BDF Underground Rainwater Tank 10000L
| Tank height | Panel thickness | Typical use |
|---|---|---|
| 1.0 – 1.5 m | 2 mm | Shallow buried reserve |
| 2.0 m | 3 mm | Standard buried tank |
| 3.0 m | 4 mm | Deep reserve, high head |
| 4.0 – 4.5 m | 5 mm | Maximum depth, pump station |
Shandong Lvjia has pressed water-tank panels in Dezhou since the plant opened, and holds ISO 9001 with import and export rights of its own.
Request a quoteThe panel is a bimetallic composite: a food-grade stainless layer bonded to hot-dip galvanised steel, then pressed and drawn in a single stroke. The stainless face carries the water; the galvanised layer carries the load.
Product dimensions
Tolerance requirements
Every tank is filled and held at full head before it leaves Dezhou, and the composite plate carries a drinking-water contact report from the Dezhou Institute of Product Quality Standards and Metrology.
Typical performance — BDF Underground Rainwater Tank 10000L
| Test | Method | Result |
|---|---|---|
| Hydrostatic | 48 h at full head | No weep at any joint |
| Drinking-water contact | Report SP2630499 | Pass |
| Shock resistance | Four-corner reinforced module | Pass |
Send the pit dimensions and the volume you need and LVJIA returns an arrangement drawing with the panel schedule before you order.
Talk to an engineerHow every tank is specified, built to your drawing, inspected and documented before it leaves the line.
We’ll help you meet your specification.
Send us a drawing or a capacity and we will come back with a specification, a price and a build slot.
Get in touchTanks our customers pair with this one. Hover or tap a card for its specification.
See the full catalog
Hỏi về sản phẩm này
Tell us the capacity and the space you have. An engineer replies with a drawing and a firm price.
Trao đổi với kinh doanh và kỹ thuật
Straight to the engineers who press the panels. First reply usually under two hours on a working day.
Shandong Lvjia Air Conditioning Equipment Co., Ltd. · Dezhou, China
