A bolted stainless steel water tank from stiffened panels — stainless quality where a welded vessel could never be delivered.
Indicative — the quotation confirms the final figure US$380 Lead time within 15 working days · ex Dezhou, Shandong
SKU LVJ-SS-BOLT
What buyers said once the tank was on site — every review left on our Alibaba store, in their own words.
The bolted stainless steel water tank from LVJIA is built on the Stainless Steel panel system at our own plant in Dezhou, Shandong. The best tank material is no use at all if the finished vessel cannot get into the room it has to serve.
A bolted stainless steel water tank is a sectional tank pressed from SUS 304 or 316 stainless sheet and closed either by argon arc welding or by bolting, depending on how the tank has to reach site. The wetted surface is solid stainless with no lining, no paint and nothing applied, so the tank does not need recoating at any point in its life. LVJIA builds it from 125 litres to 500,000 litres.
A flat stainless panel would need considerable thickness to carry full head on its own, which would make the tank heavy and expensive. Instead the panels are pressed with a stiffening profile and braced with external stiffeners and internal tie rods, so a 1.5 to 4 mm (standard; up to 8 mm by design) wall carries the load. That keeps each panel light enough to be carried by hand while the assembled tank still meets the same structural duty as a welded one.
Panels are drawn from 1.5 to 4 mm (standard; up to 8 mm by design) stainless sheet, with heavier gauges up to 8 mm where the head demands it. A welded tank is sealed with argon arc welding, which leaves a clean, fully fused seam and no filler that can leach; a bolted tank uses stainless fasteners on a food-grade gasket so it can be carried in through a doorway and assembled in place. SUS 304 suits potable and domestic duty, SUS 316 is specified where chlorides or coastal air are in play.
| Model number | Stainless steel water tank |
|---|---|
| Material | SUS 304 / 316 stainless steel |
| Type | Pressed sectional stainless tank |
| Installation | Argon arc welded or bolted |
| Wall thickness | 1.5 – 4 mm (standard; up to 8 mm by design) |
| Panel thickness range | 1.5 – 8 mm available |
| Operating temperature | 0 – 100 °C |
| Scope of application | Fire water, domestic water, drinking water |
| Specification | 125 L – 500,000 L |
| Transport package | Plywood box, iron bracket or nude |
| HS code | 8708919000 |
| Origin | Dezhou City, Shandong Province, China |
Panels are 1 × 1 m with a 1.5 to 4 mm (standard; up to 8 mm by design) wall, and capacity runs from 125 litres to 500,000 litres. Gaskets are food-grade EPDM at every joint.
| Tank height | Panel thickness | Typical use |
|---|---|---|
| Up to 1.5 m | 1.5 mm | Small domestic or roof tank |
| 2.0 m | 2 mm | Standard sectional tank |
| 3.0 m | 3 mm | Deep tank, high static head |
| 4.0 m and above | 4 – 8 mm | Maximum height, reinforced |
Every bolted stainless steel water tank is filled and held at full head before it leaves the factory, and no joint is allowed to weep. The plant is certified to ISO 9001 and the inspection certificate ships with the order; the full set is on our certifications page. The same specification is published on our Made-in-China storefront, where LVJIA is an audited supplier with a 5.0 store rating on Alibaba, 100% on-time dispatch and a response time under one hour.
Pricing for the bolted stainless steel water tank starts at US$20 per panel, falling to US$19 from 10 and US$18 from 50, FOB Tianjin or Qingdao. The minimum order is one set and lead time is within 15 working days from Dezhou, Shandong. Gaskets are a wear item on any bolted tank; a spare set is worth holding for a long-life installation.
Send the capacity you need and the space you have, and LVJIA returns an arrangement drawing with the panel schedule before you commit to anything. Our engineers answer specification questions directly through technical help, and the rest of the range sits on the Stainless Steel water tank page.
Same job, different material: the enamel sectional water tank is the same tank in glass-fused-to-steel, for sites where the surface must never be relined, while the GRP sectional water tank builds it in moulded GRP. Elsewhere in the stainless steel range there is the stainless steel 316 water tank for general-purpose duty and the welded stainless steel water tank for general-purpose duty.
At a glance
Panels are 1 × 1 m with a 1.5 to 4 mm (standard; up to 8 mm by design) wall, and capacity runs from 125 litres to 500,000 litres. Gaskets are food-grade EPDM at every joint.
Panel thickness by tank height — Bolted Stainless Steel Water Tank, Stiffened
| Tank height | Panel thickness | Typical use |
|---|---|---|
| Up to 1.5 m | 1.5 mm | Small domestic or roof tank |
| 2.0 m | 2 mm | Standard sectional tank |
| 3.0 m | 3 mm | Deep tank, high static head |
| 4.0 m and above | 4 – 8 mm | Maximum height, reinforced |
LVJIA has pressed water-tank panels in Dezhou since the plant opened, and holds ISO 9001 with import and export rights of its own.
Request a quotePanels are drawn from 1.5 to 4 mm (standard; up to 8 mm by design) stainless sheet, with heavier gauges up to 8 mm where the head demands it. The wetted face is solid SUS 304 or 316 with nothing applied to it.
Product dimensions
Tolerance requirements
Every tank is filled and held at full head before dispatch and no joint is allowed to weep. Welded seams are inspected along their full length.
Typical performance — Bolted Stainless Steel Water Tank, Stiffened
| Test | Method | Result |
|---|---|---|
| Hydrostatic | 48 h at full head | No weep at any joint |
| Weld seam | Full-length visual and dye check | Pass |
| Material | Mill certificate per batch | SUS 304 / 316 |
Send the capacity you need and the space you have, and LVJIA returns an arrangement drawing with the panel schedule before you order.
Talk to an engineerHow every tank is specified, built to your drawing, inspected and documented before it leaves the line.
We’ll help you meet your specification.
Send us a drawing or a capacity and we will come back with a specification, a price and a build slot.
Get in touchTanks our customers pair with this one. Hover or tap a card for its specification.
See the full catalog
Hỏi về sản phẩm này
Tell us the capacity and the space you have. An engineer replies with a drawing and a firm price.
Trao đổi với kinh doanh và kỹ thuật
Straight to the engineers who press the panels. First reply usually under two hours on a working day.
Shandong Lvjia Air Conditioning Equipment Co., Ltd. · Dezhou, China
