SMC · FRP · GRP
GRP / FRP / SMC Sectional Water Tanks
An SMC water tank of hot-pressed panels that bolt together on site — a rust-free SMC water tank sized to the room, safe for drinking water.
Buyer rating & certification
5.0 / 5 · Alibaba.com buyer rating
Drinking-water tested
20 / 20 · drinking-water items passed
CategoryGRP / FRP / SMC sectional tanksHot-pressed SMC water tank panels, bolted on site.Built to order, not to a size chart
5,000 m³
from 0.125 m³ upward
Six sizes, 6 to 22 mm thick
3 × 1 m
down to 0.5 × 0.5 m
About this category
Why GRP / FRP
panels
GRP, FRP and SMC are three names for the same thing: a glass-reinforced composite panel, hot-pressed in a steel die. An LVJIA SMC water tank is built from exactly those panels. An SMC water tank is the tank you specify when it has to get into a room it could never be carried into whole — light, rust-free and food-grade, it goes up a stairwell one panel at a time and comes apart the same way when the building changes.
- GRP, FRP and SMC: one panel, three names
- No rust, no leaks and a long service life
- Easy to assemble, take apart and maintain by hand
- 0.125 to 5,000 m³, up to 5 m high
- Panels pass through a standard service door
- Tested safe for drinking water on GB/T 17219-2025
Hot selling products
The nine tanks we build most often. Hover or tap a card for its specification.
See the full catalog
- Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
Modular GRP Water Tank, Built to Size
Full details
- Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
GRP Wastewater Tank, 180 m³
Full details
- Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
GRP Cooling Water Tank, Industrial
Full details
- Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
SMC Water Tank for Hotels and Apartments
Full details
- Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
GRP Farm Water Tank 75,000 Litre
Full details
- Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
Portable GRP Water Tank for Construction
Full details
- Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
GRP Fire Water Tank, 40,000 Gallon
Full details
- Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
GRP Sectional Water Tank, Bolted Panels
Full details
- Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
GRP Potable Water Tank, Food Grade
Full detailsGRP / FRP / SMC water tank catalog
Every SMC water tank on this page is built to order from hot-pressed panels. Search by name, or filter by capacity, application and build type.
A GRP anti corrosion water tank with no metal in contact with the water — nothing to rust, nothing to coat, nothing to repaint.
GRP Anti-Corrosion Water Tank
View details A GRP cooling water tank for industrial circuits — no rust in the treated water and far less heat pickup than steel.
GRP Cooling Water Tank, Industrial
View details A 75,000 litre GRP farm water tank for irrigation and livestock — no rust, no algae and no lifting plant needed on site.
GRP Farm Water Tank 75,000 Litre
View details A GRP fire water tank holding a 40,000 gallon reserve — water that sits untouched for years and is still clean when the pump starts.
GRP Fire Water Tank, 40,000 Gallon
View details A GRP potable water tank in food-grade SMC — no rust, no taste and no lining that has to be renewed.
GRP Potable Water Tank, Food Grade
View details A GRP sectional water tank assembled from bolted panels — every component carried in by hand through a normal doorway.
GRP Sectional Water Tank, Bolted Panels
View details A 180 m³ GRP wastewater tank for effluent and treated sewage — unaffected by the sulphides that attack steel and concrete.
GRP Wastewater Tank, 180 m³
View details
A horizontal GRP water tank for spaces with no headroom — wide and shallow, holding full capacity under a low ceiling.
Horizontal GRP Water Tank, Low Profile
View details
A household GRP water tank from 1 m³ upwards — clean drinking water at home, with a service life measured in decades.
Household GRP Water Tank, Durable SMC
View details A modular GRP water tank built to the space you have — 1 m and half-metre panels step the capacity to fit the room.
Modular GRP Water Tank, Built to Size
View details A portable GRP water tank that bolts up on site and comes apart again — panels carry by hand, so it moves with the job.
Portable GRP Water Tank for Construction
View details
A rooftop GRP water tank assembled at height — panels go up in the lift, so there is no crane and no road closure.
Rooftop GRP Water Tank, Bolted
View details An SMC water tank for hotels and apartment blocks — installed or replaced without closing the building down.
SMC Water Tank for Hotels and Apartments
View detailsNo product matches that
Try a shorter search, or clear a filter or two.
Product capabilities
Capability, Process & Control
Every SMC water tank on this page is molded, trimmed, punched and tested inside our own plant in Wucheng County, Dezhou. Nothing is subcontracted — which is what lets us hold a tolerance, change a dimension on your drawing and still ship on the date we gave you.
- SMC hot-press molding in steel dies
- Panel trimming and bolt-hole punching
- Dimension, flatness and surface checks
- Filled, leak tested and flat-packed for the container
Capability
Panel thickness
6–22 mm
hot-pressed SMC, six panel sizes
On-time dispatch
100%
recorded on Alibaba.com
How every tank is built, stage by stage
Four stages under one roof, from SMC sheet to a tested tank flat-packed on a pallet. The same route runs for every tank in this catalog — only the die and the panel size change. Nothing is subcontracted at any stage.
- Molding SMC sheet hot-pressed into panels in steel dies.
- Trimming & punching Edges trimmed and bolt holes punched to the drawing.
- Inspection Thickness, flatness and hole position checked, batch by batch.
- Testing & dispatch Trial-assembled, leak tested, documented and flat-packed.
Every stage happens in our own plant in Wucheng, Shandong.
Every product here can be made to your drawing
Nothing in this catalog is a fixed size. Capacity, footprint, height, partitions, fittings and colour are all specified per order.
- Any capacity and footprint Sized to the room you have, up to 5 m high.
- Partitions and insulation Divided or insulated builds where the duty needs them.
- Fittings on your schedule Nozzles, manways, ladders, level gear and pipe connections.
- Drawing first, commitment after A layout and a bill of materials before anything is agreed.
Tell us the capacity, the duty and the space — an engineer replies.
Tested by an institute that does not work for us
Twenty drinking-water parameters, measured in the soak water of our SMC water tank by a CMA-accredited state institute. Every one qualified — and that inspection runs on every tank we build.
Inspection & testing
In house- Hydrostatic leak testFilled and held before dispatch
- Panel thickness & flatnessMeasured on every moulded batch
- Bolt-hole positionChecked against the approved drawing
- Material traceabilityEvery SMC batch logged to its record
- Third-party water testingThrough a CMA-accredited institute
Certifications & standards
On file- GB/T 17219-2025Report SP2630502, 20 of 20 passed
- CE · EN 13280:2001ICR/VC/HS2506113
- ISO 9001:201507624Q0960R3S-SD/001
- SGS verified supplierAssessment and onsite check
Quality
Inspection · testing
Certification · standards
Parameters passed
Inspection stages
Inspection process
Six stages · every batch- 1
Incoming SMC sheet
Material records checked against the order.
- 2
Panel molding
Hot-pressed in steel dies, batch by batch.
- 3
Trim and punch
Edges and bolt holes checked before assembly.
- 4
Thickness and flatness
Measured on the panel, not estimated.
- 5
Hydrostatic test
Filled, held and inspected before dispatch.
- 6
Final dimensions
Checked against the approved drawing.
Where GRP / FRP tanks go to work
Six sectors served from one plant in Wucheng County, Dezhou. The companies shown in each strip are well-known operators in that sector, listed as examples of the work — they are not LVJIA customers.
Reference builds & certifications
ISO 9001:2015
Quality management system
Cert. no. 07624Q0960R3S-SD/001 · valid to 21 Jun 2027ISO 14001:2015
Environmental management
Cert. no. 07624E0636R2S-SD/001 · valid to 9 Oct 2027CE marking
EN 13280:2001, issued by ICR
Verification no. ICR/VC/HS2506113 · valid to 23 Jun 2030& test reports
Bolted sectional tank · SMC
Note: panels flat-pack through a standard service door and are assembled in place, so the tank does not have to fit through the opening in one piece.
See the buildRooftop reserve · GRP / FRP
Note: GRP / FRP does not rust, so there is no lining to fail and no coating to renew — which is why it is specified on rooftops and in plant rooms that are hard to get back into.
See the buildThe verified record
Verified buyer review — “Design: perfect fit.” Netherlands, GRP sectional tanks, August 2026.
See the numbersThe plant behind the tank
One plant, one team — cutting, welding, finishing and testing all stay in house.
Our storyRelated products
Four more tanks from the same plant, built to the same standard. Hover or tap a card for its specification.
See the full catalog - Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
Rooftop GRP Water Tank, Bolted
See catalog - Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
Household GRP Water Tank, Durable SMC
See catalog - Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
Horizontal GRP Water Tank, Low Profile
See catalog - Material
- FRP / SMC moulded composite
- Capacity
- 1 – 5000 m³
- Standard panels
- 6 sizes; maximum 3 × 1 m
- Wall
- 8 – 16 mm by height
GRP Anti-Corrosion Water Tank
See catalogSMC water tank questions, answered by the factory
The questions buyers ask before an SMC water tank is quoted, answered with the figures our own inspection sheets use.
Ask our engineersHow do I size an SMC water tank for my plant room?
Start with the room, not the tank. An SMC water tank is assembled from six pressed panel sizes — 3 × 1 m; 2 × 1 m; 1.5 × 1 m; 1 × 1 m; 1 × 0.5 m; 0.5 × 0.5 m — so the footprint can be squared off against walls, doorways and pipe runs instead of forcing a standard vessel into the space. Send the floor area, the headroom and the volume you need to hold and the panel schedule is drawn around all three.
What capacities does this catalog cover?
From 0.125 m³ to 5,000 m³ and up to 5 m high. Every SMC water tank on this page is built to order, so the same range covers a rooftop domestic store and a municipal fire reserve. Panel thickness runs from 6 mm to 22 mm and is set by the water height above each course, so the lower rows of a tall SMC water tank are thicker than the top.
Can the panels be carried into an existing building?
That is the main reason buyers choose one. A single panel goes up a stairwell, through a standard doorway and into a lift, so an SMC water tank can be built inside a room it could never be carried into whole — and taken apart the same way when the building changes. Nothing has to be welded on site; the panels bolt together with gaskets and non-toxic sealant.
Is the stored water safe to drink?
Yes. Twenty drinking-water parameters were measured in the soak water of our SMC water tank by a CMA-accredited state institute and all twenty qualified, issued as report SP2630502 dated 18 May 2026 against GB/T 17219-2025. The moulded face is smooth and non-porous, so there is nothing for biofilm to key into. Where a project calls for it, potable contact is also covered by NSF/ANSI 61.
Will it rust or need a lining?
No. An SMC water tank has no steel in contact with the water, so there is nothing to rust, nothing to coat and no lining that can fail and need replacing. That is what makes it the usual choice for rooftop and plant-room storage where access for maintenance is awkward, and for aggressive water where a coated steel tank would be on a repainting cycle.
What certifications does it carry?
Every SMC water tank ships against ISO 9001:2015, certificate 07624Q0960R3S-SD/001, with ISO 14001 and ISO 45001 on file — ISO 9001 sets out what that standard covers. CE marking is held against EN 13280:2001 under ICR/VC/HS2506113, and LVJIA is an SGS verified supplier following assessment and an onsite check.
How is it inspected, packed and shipped?
Each SMC water tank is filled, hydrostatically leak tested and held before dispatch. Panel thickness and flatness are measured on every moulded batch, bolt-hole position is checked against the approved drawing and every SMC batch is logged to its material record. The tank then ships flat-packed for the container, kitted with its bolt sets and seals, from the LVJIA plant in Wucheng County, Dezhou, Shandong.
Send us your tank size. We send back a drawing and a price.
Tell us the capacity, the site and where the tank is going. An engineer — not a sales script — replies with a panel layout, a bill of materials and a delivered cost.
Have a drawing? Attach DWG, PDF or images to your enquiry — we build to your dimensions, not to a size chart.
- Manufacturer, not a trader
- 20 of 20 drinking-water items passed
- Reply within 2 hours